Home > Support > Knowledge Base
Knowledge Base
 
Reset Search
Search
 

 

Knowledge

When Running a Digi ESP Application as Remote a Reboot Timeout Error is Seen

« Go Back

Information

 
Problem Resolution

When Running a Digi ESP Application as Remote a Reboot Timeout Error is Seen

After uploading project files, a reboot is sent, and the ESP checks every 2 seconds whether the device is connected again. The maximum time to wait for the reconnection is the reboot timeout (60 seconds by default), if the device is not reachable after the timeout value expires a timeout error is shown.

Please confirm you are using the  latest version of Digi ESP for Python:

http://www.digi.com/support/productdetl.jsp?pid=3632&osvid=0&s=393&tp=1

Additionally, you may increase the reboot timeout in your device profile within Digi ESP, Device Manager > LAN Connection > Reboot Timeout.


Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255