> Knowledge Base
How to work with ADDP device discovery protocol and devices running embedded Linux like ConnectCore, ConnectCard, Digi Connect ME 9210
What is ADDP? What is link-local? Are these available for Rabbit boards?
Unable to configure AnywhereUSB IP settings, or reboot an AnywhereUSB, in the AnywhereUSB Configuration Utility
Device Discovery Troubleshooting Tips
How to use the DgIpServ utility to assign an IP address to an EtherLite in Windows
Digi Device Discovery Tool Shows Unit as Misconfigured
Firewall concerns for outbound EDP connections to Device Cloud or Remote Manager
How to Set Up a TransPort with a Gobi 2000/3000 for use with Sprint
Console Management Configuration with PortServer TS/II and Digi One TS/RP Products
HOW TO: Troubleshoot Device Cloud Connectivity Issues from the WebUI of a Digi Connect WAN or ConnectPort gateway
What would you like to know?
< Back to search results
What ports are used with Digi's Device discovery ADDP protocol?
ADDP uses udp port 2362 and a mulicast ip address of 18.104.22.168. You will need to enable these on your firewall for the ADDP protocol to work for the device discovery utility.
Was this article helpful?
Please tell us how we can make this article more useful.
© Copyright 1996 - 2015 Digi International Inc. All rights reserved. Your M2M Expert®