Home > Support > Knowledge Base
Knowledge Base
 
Reset Search
Search
 

 

Knowledge

What is the default IP address of an AnywhereUSB, and how can it be changed?

« Go Back

Information

 
Article Number000002587
Problem Resolution
Related KB article:  Device Discovery Troubleshooting Tips

If needed, the user can factory default the AnywhereUSB device to set the unit back to DHCP.
Note:    This will remove any settings on the AnywhereUSB device.   Please ensure to backup the configuration before doing the factory default process.

AnywhereUSB factory reset procedure
 
  • Regarding the legacy / 1st generation AnywhereUSB/5 model, it has the following static IP address by default:
IP Address: 192.168.254.222
Subnet Mask: 255.255.0.0
This specific model is configured exclusively through the AnywhereUSB Configuration Utility.

Related KB article:  No Remote Hubs found message in the AnywhereUSB Configuration Utility

 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255