Home > Support > Knowledge Base
Knowledge Base
 
Reset Search
Search
 

 

Knowledge

Interface board schematic

« Go Back

Information

 
Problem Resolution

Attached are the schematics for Digi radio interface boards.

  • SPKG: Older interface board used with XStream radios--a good reference design schematic for creating your own RS232 interface board.
  • XIB-R: Current interface board used with XStream and XCite radios.
  • XTIB-R: Current interface board used with XTend radios.
  • Also attached is a mechanical diagram of the SPKG plus XStream OEM module.
  • XBIB-R: XBee/XBee Pro interface board with RS-232 interface.
  • XBIB-U: XBee/XBee Pro interface board with USB port and FTDI Chip.
  • XBIB-U-SP: SMT version of the XBee interface board with surface pads for soldering the module into place.
  • XBIB-U-SS: SMT version of the XBee interface board with spring loaded pins.

Relevant Files

Note: The XBIB-U-DEV is used for both the surface mount and through-hole versions of the XBee radio. If using a through-hole XBee with this interface board, please refer to page 3 for the correct pinout of the XBee, there are additional pins available on the SMT module that are not present on the through-hole variant.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255