Home > Support > Knowledge Base
Knowledge Base
 
Reset Search
Search
 

 

Knowledge

How do I disable Ethernet auto-negotiation on the ConnectCore 9U?

« Go Back

Information

 
Problem Resolution

At the U-Boot prompt enter:

setenv link 10:full
saveenv

Power cycle to make the new settings take effect.

Other possible settings:
setenv link 10:half;saveenv
setenv link 100:full;saveenv
setenv link 100:half;saveenv

To switch back to autonegotiation, remove the link variable:

setenv link; saveenv

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255