Home > Support > Knowledge Base
Knowledge Base
 
Reset Search
Search
 

 

Knowledge

HOW TO: Install the RealPort Driver in Ubuntu Linux

« Go Back

Information

 
Problem Resolution

HOW TO: Install the RealPort Driver in Ubuntu Linux

The latest source rpm driver candidate supporting the latest kernels is available for download from:

http://www.digi.com/support/productdetail?pid=2229&type=drivers

Make certain the rpm, alien, kernel-headers and the libncurses5-devel packages are installed on the system.

To install:

Make a symbolic link the bash shell in place of dash (there are problems using dash):

sudo rm /bin/sh
sudo ln -s /bin/bash /bin/sh

sudo script
sudo rpmbuild --rebuild (driver-ver).src.rpm
sudo alien -d --scripts /usr/src/rpm/RPMS/(arch)/dgrp-(ver).(arch).rpm
sudo dpkg -i dgrp_(ver+1)_(arch).deb


Where (arch) represents the system architecture and (ver) represents the driver version. The (ver+1) represents alien incrementing the version number by 1. For example, dgrp-1.9-34.i386.rpm will be labeled dgrp_1.9-35.i386.deb.

exit

Configure the daemon/ports:

sudo dgrp_gui

or for non-graphical configuration:

# dgrp_cfg_node init a 192.168.0.4 16

The above command configures the Digi unit with IP address 192.168.0.4 and 16 ports to have tty ID's of ttya00 through ttya15.

If errors are seen, the file called typescript residing in the directory where the script command can be used for debugging.


Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255