Home > Support > Knowledge Base
Knowledge Base
 
Reset Search
Search
 

 

Knowledge

Does the AnywhereUSB TS44 support multiple computer connections?

« Go Back

Information

 
Article Number000006814
Problem Resolution
All 4 of the USB ports of the AnywhereUSB TS44 model can connect to one computer at a time, giving that computer access to all of the USB devices attached to all 4 ports. The 4 USB ports cannot be "split up".

However, the 4 serial ports can be "split up". For example, you can have one computer connected to serial port #1, another computer connected to serial port #2, and so forth. Or you could have one computer connected to serial ports #1 and 2, and another computer connected to the remaining serial ports #3 and 4.

Think of the 4 serial ports as being separate, whereas the 4 USB ports are a group.  It might also help to think of the AnywhereUSB TS44 as two products in the same box, where one of the products is a 4-port USB-over-IP hub, and the other is similar (but not identical) to a Digi ConnectPort TS 4.

NOTE:  The 4 serial ports on an AWUSB TS44 model only function in "RealPort" mode, where the Digi RealPort driver is installed on a computer, and the serial ports are accessible by COM port numbers (using Windows as an example).  Other serial port modes that some other Digi products support, such as TCP/UDP sockets are not supported with the AnywhereUSB TS44.

Related KB articles:

Can multiple host computers connect to an AnywhereUSB at the same time?
10-pin RJ45 serial port pinout for the AnywhereUSB TS44

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255