Home > Support > Knowledge Base
Knowledge Base
 
Reset Search
Search
 

 

Knowledge

AnywhereUSB firmware recovery procedure

« Go Back

Information

 
Article Number000004822
Problem Resolution
This recovery process re-flashes the firmware to an AnywhereUSB as a last resort (before potentially RMA'ing the unit) and is intended for situations like:

1. Powered down or rebooted AWUSB during a traditional firmware update.

2. AWUSB System Status LED is doing something abnormal (anything other than blinking slow Green), even after it's powered on without any USB devices attached and without a network cable attached.

Download links for each model (at this time the AWUSB/5 M is missing):

ftp://jmcbane_ro:1readonly!@digiftp.digi.com/AWUSB/recovery/Aw14Ser.zip
ftp://jmcbane_ro:1readonly!@digiftp.digi.com/AWUSB/recovery/Aw2Ser.zip
ftp://jmcbane_ro:1readonly!@digiftp.digi.com/AWUSB/recovery/Aw5g2Ser.zip
ftp://jmcbane_ro:1readonly!@digiftp.digi.com/AWUSB/recovery/Awts44Ser.zip

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255