Home > Support > Knowledge Base
Knowledge Base
 
Reset Search
Search
 

 

Knowledge

AIX console information not displaying

« Go Back

Information

 
Problem Resolution

Symptom:

The information is not displaying from the AIX serial port even though there appears to be a successful connection to the port.

Possible Causes:

  • Carrier detect is not being asserted on the AIX serial port.
  • The cable attached from the Digi port to the AIX serial port is not crossed over.
  • Bad or damaged port.

Solutions:

  • Add the clocal flag in smit for the appropriate serial port to the LOGIN and RUN TIME flags.
  • See the related URL for appropriate cabling pin-outs.
  • See the related URL for performing port testing.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255